For everything... general (no kidding).
Moderator: Atari Frog
-
Elesias
- Posts: 94
- Joined: Mon Oct 04, 2004 9:17 pm
- Location: France - dans le Sud Est
Post
by Elesias » Fri Dec 24, 2004 12:01 pm
Hi guys,
Now I own a 1050-2-PC cable, I'm trying to restore ATR files to genuine Atari floppies. Unfortunately, there're a lot of files not working out there.
Did I miss something, or do I have to cross my fingers each time ?
And, above all else, merry Christmas

-
Andre
- Posts: 2233
- Joined: Mon Mar 01, 2004 10:11 am
- Location: Deutschland
Post
by Andre » Fri Dec 24, 2004 12:19 pm
Hello Elesias,
nice to see you back on track
Elesias wrote:
Now I own a 1050-2-PC cable, I'm trying to restore ATR files to genuine Atari floppies. Unfortunately, there're a lot of files not working out there.
What software do you use on the PC-side? Does this software format the floppy discs in the 1050 drive? Maybe you have tried to write a medium density atr image to a non-formatted or single density formatted floppy disc?
Did I miss something, or do I have to cross my fingers each time ?
Sometimes old floppies are faulty, or your 1050 may have a problem also. Have you tried to write the same atr-image to different floppy discs?
André
-
Elesias
- Posts: 94
- Joined: Mon Oct 04, 2004 9:17 pm
- Location: France - dans le Sud Est
Post
by Elesias » Fri Dec 24, 2004 12:30 pm
Hi Andre,
Thanks for the quick answer.
I'm using the ProSystem for Windows, from the APE Software suite.
The options I use are :
- Use Interleaved Writes
- Format Destination
- Verify Writes
But I leave unchecked :
- Write Empty Sectors
- Disable Track Buffers
Everything runs fine till I try the floppy with a 800XL. Sometimes it works (with ATR file version 1, 2 ou 3), sometimes not. The 1050 seems to be ok, because original games load fine. Are some dumps not fully compatible with this system ?
-
Elesias
- Posts: 94
- Joined: Mon Oct 04, 2004 9:17 pm
- Location: France - dans le Sud Est
Post
by Elesias » Fri Dec 24, 2004 1:32 pm
And how do you do THAT ?
The Atari world is still quite new for me, with only a 20 years delay

-
Atari Frog
- Posts: 2875
- Joined: Sat Jan 31, 2004 9:08 pm
Post
by Atari Frog » Fri Dec 24, 2004 1:48 pm
To disable BASIC, you'll need to press the OPTION key while booting (this is required for all "ML" games in the database). For programs written in BASIC (marked "BAS" in our database), just switch on the computer. If you see a "LOAD WITH OS-B" in the COMMENTS part, you'll need a "translator"... which I can send you as an ATR.
--
Atari Frog
http://www.atarimania.com
-
Elesias
- Posts: 94
- Joined: Mon Oct 04, 2004 9:17 pm
- Location: France - dans le Sud Est
Post
by Elesias » Fri Dec 24, 2004 1:55 pm
Thanks, the OPTION trick solved most of my problems
Heya Donkey Kong Junior !
